Wuhan Huaying Electric Power Tech & Science Co., Ltd
Wuhan Huaying Electric Power Tech & Science Co., Ltd 20 YEARS experience in design and manufacture Hipot Test Set Export to 50 Countries Worldwide Professional Technical Support ISO/CE/CNAS/SGS
Add to Cart
High Voltage C Type Megger Insulation Tester 5000V 2500V With ISO Ceritificate
Technical table:
| Model | HY 2533 | HY2550 | |||
| Output Voltage | 500V DC | 1000V DC | 2500V DC | 5000V DC | |
| Accuracy | Temperature | 23℃±5℃ | |||
| Insulation Resistance | 1MΩ～20GΩ ±5％ | 2MΩ～40GΩ ±5％ | 5MΩ～100GΩ ±5％ | 10MΩ～200GΩ ±5％ | |
| Output Voltage | 4MΩ～20GΩ 0～+10％ | 8MΩ～40GΩ 0～+10％ | 20MΩ～100GΩ 0～+10％ | 40MΩ～200GΩ 0～+10％ | |
| Short Circuit Current | Approximately 1mA | ||||
| Working Power Supply | 8pcs AA alkaline batteries(8pcs AA rechargeable battery, charging adapter) | ||||
| Working Temperature and Humidity | 0℃～40℃,maximum relative humidity 80％ | ||||
| Storage Temperature and Humidity | -10℃～60℃,maximum relative humidity 90％ | ||||
| Insulating Property | Insulation resistance between circuit and housing≥50MΩ | ||||
| Withstand Voltage | Apply 3kv between tester circuit and housing, 50Hz sine AC voltage,last for one minute,no breakdown or flashover | ||||
| Size | 230(L)×190(W)×90(H)mm | ||||
| Weight | 2kg | ||||
| Accessory | A set of one plug test lead, manual, Certificate of Approval, Charging adapter(C type) | ||||
Panel Discription
| Table 2: Structure diagram illustration | ||
| S/N | Name | Function |
| (1) | EARTH | Connect to the housing of tested device or to earth |
| (2) | LINE | High voltage output port, connect to high voltage conductor of tested device |
| (3) | GUARD | Connect to high voltage retaining ring of tested device,to eliminate the influence of surface leakage current |
| (4) | Double Line of Scale Mark | Upper gear is green: 500V/0.2GΩ～20GΩ, 1000V/0.4GΩ～40GΩ, 2500V/1 GΩ～100 GΩ, 5000V/2GΩ～200 GΩ. Lower gear is red: 500V/0～400MΩ, 1000V/0～800 MΩ, 2500V/0～2000 MΩ, 5000V/0～4000 MΩ. |
| (5) | Green LED | Read scale of green gear (upper gear) when green LED light up |
| (6) | Red LED | Read scale of green gear (lower gear) when red LED light up |
| (7) | mechanical zero adjustment | Adjust mechanical pointer position to ∞ scale mark |
| (8) | Band Switch | Realize functions like output voltage selection, battery detection, power switch |
| (9) | Charging Socket | For C type tester, input voltage is 15V |
| (10) | Test Button | Puss Test Button to start test and lock the button by rotating clockwise after push |
| (11) | Status Indication Light | Display information like high voltage output, power working condition, charging condition and so on. |